Skip to content

MEGA Ballast Distal Access Platform recallZ-0188-2026 · Balt USA, LLC · initiated Sep 25, 2025

Open, Classified

Is my device affected?

  1. Compare the model, catalog and lot or serial numbers on your device or its packaging with the code information below. A recall usually covers only specific models or lots.
  2. If yours is listed, follow the instructions from Balt USA, LLC or your healthcare provider. The company's action is summarized under what the company is doing.
  3. Do not stop using a prescribed or implanted device on your own — talk to your healthcare provider first.

Where to find your model and lot numbers · What recall classes and statuses mean

Why it was recalled

Due to an identified manufacturing defect involving coating material lifting within the catheter's distal inner diameter/lumen.

FDA root cause category: Process control

What the company is doing

On 09/18/2025, the firm sent via Priority Mail an "URGENT: MEDICAL DEVICE RECALL" Letter to customers informing them that, Balt USA has became aware of a situation where multiple Mega Ballast units failed the in-house QC final inspection due to the exterior coating material lifting. Further assessment found this coating also went inside of the ID and protruded from the inner surface of the catheter, which is not intended as part of the manufacturing process. Hospitals are instructed to: - Cease use of the affected product. - Inform hospital staff, such as safety officers, pharmacists, purchasing agent, head of neuroradiology and the neuroradiology staff, physicians including but not limited to endovascular neurosurgeons and interventional neurologists, as well as any other person if deemed necessary. - Identify and locate the Mega Ballast products concerned by this recall procedure. - Collect and put in quarantine the Mega Ballast products concerned by this recall, then return them to Balt USA through the usual administrative returns procedure by contacting Balt USA s Customer Service department. Distributors are instructed to: - Cease processing of the affected recall product. - Inform customers about this notice. - Identify and locate the Mega Ballast products concerned by this recall procedure. - Collect and put in quarantine the Mega Ballast products concerned by this recall procedure and then return them to your local distributor as per their return procedure. For questions or further assistance: Contact: Quality Department Email: [email protected] Balt USA, LLC 29 Parker Suite 100 | Irvine CA, 92618 | USA Telephone: +949.788.1443 | Fax: +949.788.1444

Recall details

Recall number
Z-0188-2026
Status
Open, Classified
Initiated by the company
Sep 25, 2025
Posted by the FDA
Oct 24, 2025
Recalling firm
Balt USA, LLC
Quantity
207 catheters
Product code
DQY
FDA submissions
K242376
Distribution
US distribution to states of: AL, CA, CO, CT, FL, IL, KY, MA, NY, TN, TX, and UT.

Product description

Brand Name: MEGA Ballast Distal Access Platform Product Name: Mega Ballast Model/Catalog Number: MEGABT09180, MEGABT09190, MEGABT091100, MEGABT091110 Software Version: N/A Product Description: The Mega Ballast 091 is designed with a semi-rigid proximal shaft and a highly flexible distal shaft. The design facilitates the advancement of the Mega Ballast to access the tortuous vasculature over a guidewire and a respective dilator. The outer surface of the Mega Ballast is coated with a hydrophilic coating to facilitate lubricity from tip to 40 cm proximal. The proximal end of the Mega Ballast incorporates a Luer fitting hub for the attachment of accessories. The Mega Ballast is provided sterile, non-pyrogenic, and is intended for single use only. Component: Not a component

Code information (models, lots, serial numbers)

Model Numbers and UDI-DI codes: Model No MEGABT09180 (00840303711780) Model No MEGABT09190 (00840303711797) Model No MEGABT091100 (00840303711803) Model No MEGABT091110 (00840303711810) Lot Numbers: F250600687, F250600686, F250600685, F250600455, F250600346, F250600345, F250600010, F250501434, F250501346, F250501091, F250500824, F250400219, F250400024, F250301020, F250300297, F250100956

Devices named in this recall

4 devices in the FDA device registry whose identifier appears in the recall's code information.

Product lines

Sources and updates

How recalls are matched to devices · Editorial policy · Report an error on this page