NA S-6AC-G1Recalls & reported problems

Summary

The FDA's MAUDE database contains 1 adverse event report that list this exact device (DI 00845384012672), received between Apr 7, 2022 and Apr 7, 2022 — classified as 1 malfunction.

The most frequently reported specific device problem is “Dull, Blunt” (1 report).

39 other recalls cover devices cleared under the same FDA submission (K113476); they may or may not involve this specific model.

Reports come from manufacturers, hospitals and patients and are not verified by the FDA. A report does not prove the device caused the event, and counts can't be used to compare devices or estimate failure rates. What reports can and can't tell you · How this data works · Data updated Oct 16, 2026.

Most reported problems

Recent adverse event reports

The 1 most recent of 1 reports, in the reporter's own words as published by the FDA.

• MalfunctionApr 7, 2022Dull, Blunt; Separation Problem; Dull, Blunt; Separation Problem

  IT WAS REPORTED FROM (B)(6) THAT DURING SERVICE AND EVALUATION, IT WAS DETERMINED THAT THE CUTTER DEVICE WAS STUCK IN THE HANDPIECE, SHOWED SIGNS OF USE AND WEAR AND THE CUTTING EDGES WERE WORN AND BROKEN IN SOME PLACES. IT WAS ALSO FOUND THAT THE CUTTER SHOWED SIGNS OF CORROSION AND REPROCESSING. IT WAS NOTED IN THE SERVICE ORDER THAT THE DEVICE WAS UNABLE TO LOCK AND DETACH THE BURR. THIS EVENT DID NOT OCCUR DURING SURGERY. THERE WAS NO PATIENT INVOLVEMENT. THERE WERE NO REPORTS OF INJURIES, MEDICAL INTERVENTION OR PROLONGED HOSPITALIZATION. ALL AVAILABLE INFORMATION HAS BEEN DISCLOSED. IF ADDITIONAL INFORMATION SHOULD BECOME AVAILABLE, AN ADDITIONAL REPORT WILL BE SUBMITTED ACCORDINGLY.

  Patient problems: No Clinical Signs, Symptoms or Conditions

  MAUDE report 14041813 ↗

Recalls under the same FDA submission

These recalls involve devices cleared under K113476. One submission often covers many models, so check the product and lot details in each record.

• Z-2840-2016 · Aug 26, 2016 · Terminated
  G1 Dissection Tool - 6MM CRS DBALL, 2mm Shaft EXP, M; For cutting and shaping bone including spine and cranium.
• Z-2839-2016 · Aug 26, 2016 · Terminated
  G1 Dissection Tool - 3mm FLUTED BALL; For cutting and shaping bone including spine and cranium.
• Z-2837-2016 · Aug 26, 2016 · Terminated
  G1 Dissection Tool - 7mm FBALL L; For cutting and shaping bone including spine and cranium.
• Z-2838-2016 · Aug 26, 2016 · Terminated
  G1 Dissection Tool - 3mm CRS DBALL, 2mm SHAFT EXP, M; For cutting and shaping bone including spine and cranium.
• Z-2281-2015 · Apr 13, 2015 · Terminated
  ANSPACH - Fluted Drum, Side Cut only 5MM x 14MM , REF L-5DRC-G1. Cutting shaping bone including spine and cranium.
• Z-2303-2015 · Apr 13, 2015 · Terminated
  ANSPACH - 5MM Fluted Ball, Extends 27MM; REF M-5B-27-G1. Cutting shaping bone including spine and cranium.
• Z-2312-2015 · Apr 13, 2015 · Terminated
  ANSPACH - 2.3MM Fluted Matchstick, Extends 22MM; REF S-8N-L-G1 Cutting shaping bone including spine and cranium.
• Z-2287-2015 · Apr 13, 2015 · Terminated
  ANSPACH - Fluted Barrel; 8MM x 12.5MM REF L-8BA-G1 Cutting shaping bone including spine and cranium.
• Z-2289-2015 · Apr 13, 2015 · Terminated
  ANSPACH - Extra Coarse Diamond Ball; 8MM REF L-8DX-G1 Cutting shaping bone including spine and cranium.
• Z-2310-2015 · Apr 13, 2015 · Terminated
  ANSPACH - 5MM Diamond Ball, 2MM Shaft Exposure; REF S-5D-2-G1 Cutting shaping bone including spine and cranium.
• Z-2283-2015 · Apr 13, 2015 · Terminated
  ANSPACH - Fluted Drum, Side Cut only, 6MM x 14MM REF L-6DRC-G1 Cutting shaping bone including spine and cranium.
• Z-2294-2015 · Apr 13, 2015 · Terminated
  ANSPACH - 4MM x 11 MM Fluted Barrel, 14 Flutes; REF M-4BA-A-G1. Cutting shaping bone including spine and cranium.
• Z-2306-2015 · Apr 13, 2015 · Terminated
  ANSPACH -4MM Carbide Fluted Ball, Extends 27MM; REF S-4BL-C-G1. Cutting shaping bone including spine and cranium.
• Z-2304-2015 · Apr 13, 2015 · Terminated
  ANSPACH -1.5MM x 7.5MM Cylindrical Carbide Drum, Extends 25MM; REF S-15DRMC-L-G1. Cutting shaping bone including spine and cranium.
• Z-2305-2015 · Apr 13, 2015 · Terminated
  ANSPACH -3MM Coarse Diamond Ball,72MM Shaft Exposure; REF S-3SDC-22-G1. Cutting shaping bone including spine and cranium.

…and 24 more.