Skip to content

GAMMA 1320-0126SRecalls & reported problems

Stryker GmbH · Adapt Clip · Class 1

All models of GAMMA (249)

Data updated Oct 16, 2026 from official FDA records · Editorial policy

Adverse event reports
1
Deaths reported
0
Injuries reported
0
Recalls naming it
0

Summary

The FDA's MAUDE database contains 1 adverse event report that list this exact device (DI 07613252202059), received between May 25, 2021 and May 25, 2021 — classified as 1 malfunction.

The most frequently reported specific device problem is “Application Program Problem” (1 report).

Reports come from manufacturers, hospitals and patients and are not verified by the FDA. A report does not prove the device caused the event, and counts can't be used to compare devices or estimate failure rates. What reports can and can't tell you · How this data works · Data updated Oct 16, 2026.

Most reported problems

Device problems

  • Adverse Event Without Identified Device or Use Problem1
  • Application Program Problem1

Patient problems

  • No Clinical Signs, Symptoms or Conditions1

Recent adverse event reports

The 1 most recent of 1 reports, in the reporter's own words as published by the FDA.

  • MalfunctionMay 25, 2021Application Program Problem; Adverse Event Without Identified Device or Use Problem; Application Program Problem; Adverse Event Without Identified Device or Use Problem

    AS REPORTED: "THE ADAPT SYSTEM INITIALLY DID NOT RECOGNIZE THE SLEEVE FOR THE SHS AND THE DISTAL LOCKING WAS DRILLED PAST. THE SURGERY WAS SUCCESSFULLY COMPLETED WITHOUT THE ADAPT SYSTEM. A LONG G3 NAIL WAS IMPLANTED / MEANS PROXIMAL + DISTAL TARGET DEVICE WAS IN USE. ADAPT WAS CONNECTED THE WHOLE SURGERY BUT IGNORED WHEN THE EXPECTED INFORMATION WAS NOT PROVIDED. THE NAIL WAS LOCKED MANUALLY AT DISTAL WITH 2 SCREWS. DELAY IN SURGERY WAS 1H." ADDITIONAL INFORMATION RECEIVED FROM THE SURGEON: THE ADAPT SYSTEM DID NOT INITIALLY RECOGNIZE THE SLEEVE FOR THE SHS AND THE DISTAL LOCK WAS DRILLED PAST. THE ADAPT DID NOT RECOGNIZE THE K-WIRE ON THE SHS AT TIMES EVEN THOUGH THERE WERE ENOUGH POINTS IN THE BEAM PATH. FURTHERMORE, IT DIRECTED ME TOO FAR VENTRALLY IN 2ND PLANE. AFTER ANOTHER X-RAY IN THE AP-PLANE, IT KEPT ASKING ME TO X-RAY OTHER PLANES, ALTHOUGH THE CALCULATION HAD ALREADY BEEN DONE. IN THE MEANTIME, IT HAD ALREADY CALCULATED A TAD ON THE DRILL. THEN IT DID NOT RECOGNIZE THE SHS. THE SURGERY PROXIMAL SIDE WAS COMPLETED USING THE ADAPT, EVEN THOUGH SOME OF THE RECOMMENDATIONS HAD TO BE IGNORED AS THE SYSTEM DID NOT SHOW CORRECT VALUES. THE ADAPT SYSTEM WAS CONNECTED UNTIL THE

    Patient problems: No Clinical Signs, Symptoms or Conditions

    MAUDE report 11881264 ↗

Other ORTHOPEDIC MANUAL SURGICAL INSTRUMENT devices

All ORTHOPEDIC MANUAL SURGICAL INSTRUMENT devices →

Sources and updates

How reports and recalls are matched · Editorial policy · Report an error on this page