Connected OR Hub 0240200200Recalls & reported problems

Summary

The FDA's MAUDE database contains 13 adverse event reports that list this exact device (DI 07613327601695), received between Mar 27, 2025 and May 22, 2026 — classified as 13 malfunctions.

The most frequently reported specific device problem is “No Display/Image” (12 reports).

Reports come from manufacturers, hospitals and patients and are not verified by the FDA. A report does not prove the device caused the event, and counts can't be used to compare devices or estimate failure rates. What reports can and can't tell you · How this data works · Data updated Oct 18, 2026.

Most reported problems

Recent adverse event reports

The 13 most recent of 13 reports, in the reporter's own words as published by the FDA.

• MalfunctionMay 22, 2026No Display/Image

  IT WAS REPORTED THAT HUB 5.2 ON TOWER REBOOTING CONSTANTLY DURING SURGERY. THERE WAS A LOSS OF IMAGE. DURATION OF LOSS OF IMAGE IS 2 MINUTES.

  Patient problems: No Clinical Signs, Symptoms or Conditions

  MAUDE report 25259608 ↗
• MalfunctionMay 22, 2026No Display/Image; Output Problem

  IT WAS REPORTED THAT THE HUB FROZE AND GETTING A "PROCESSING" MESSAGE ON THE TOUCH PANEL AFTER A POWER OUTAGE IN OR 6. THE CUSTOMER WAS ATTEMPTING TO BEGIN AN EMERGENT LAPAROSCOPIC SURGERY. THE CUSTOMER COULD NOT CHANGE THE VIDEO ROUTING TO ANY OF THE STRYKER MONITORS. THERE WAS IMAGE LOSS FOR 15 MINUTES. A MOBILE VIDEO TOWER WAS ROLLED INTO THE ROOM TO COMPLETE PROCEDURE.

  Patient problems: No Clinical Signs, Symptoms or Conditions

  MAUDE report 25258193 ↗
• MalfunctionMay 18, 2026No Display/Image

  IT WAS REPORTED THAT THERE WAS INTERMITTENT CONNECTION AT THE MNA ON THE EQUIPMENT BOOM. THE SIGNAL WILL DROP AND WILL BE COMPLETELY BLACK. SIGNAL CAN BE RESTORED BY RESEATING THE CABLE IN THE MNA BUT WILL DROP INTERMITTENTLY. THE HUB ALSO SPONTANEOUSLY REBOOTED DURING A CASE AND THE TOUCH PANEL WENT BLACK AND WAS NOT FUNCTIONING. THE HUB REMAINED ON AND BEGAN BOOTING UP AND THE TOUCH PANEL FUNCTIONALITY WAS RESTORED. THERE WERE NO ADVERSE CONSEQUENCES OR DELAYS. THEY WERE ABLE TO USE A STRYKER ENDO TOWER AND THEY HAD PLENTY OF TIME TO SET THAT UP AND THE CASE WENT NORMALLY. THEREFORE THERE WAS A LOSS OF IMAGE.

  Patient problems: Insufficient Information; No Clinical Signs, Symptoms or Conditions

  MAUDE report 25211166 ↗
• MalfunctionMar 17, 2026Erratic or Intermittent Display; No Display/Image

  IT WAS REPORTED THAT IT KEEPS CRASHING DURING SURGERY AND CAUSING FLICKERING. IT WAS NOTICED DURING SURGERY AS THE IMAGE KEPT FLICKERING AND THEY HAD TO DELAY THE CASE. THERE WAS A FULL LOSS OF IMAGE. IT WAS FLICKERING FREQUENTLY ENOUGH THAT MADE IT INOPERABLE. PROCEDURE COMPLETED BY BROUGHT IN A ROLLING VIDEO TOWER BROUGHT IN A ROLLING VIDEO TOWER.

  Patient problems: No Clinical Signs, Symptoms or Conditions

  MAUDE report 24616805 ↗
• MalfunctionMar 17, 2026No Display/Image; Application Program Freezes or Fails to Launch

  IT WAS REPORTED THAT THEY HAD TO GO TO ANOTHER ROOM, ROOM DOWN CAUSE HUB WONT COMPLETE LOAD.

  Patient problems: Insufficient Information

  MAUDE report 24616804 ↗
• MalfunctionMar 4, 2026Erratic or Intermittent Display; No Display/Image; Connection Problem

  IT WAS REPORTED THAT OR HUB WAS ON 5.2 SW IN INTEGRATED ROOM. IN THE SETUP THEY USE HUB DISPLAY SETTINGS TO CHANGE THE DISPLAY FORMAT OF AN HDMI OUTPUT TO DVI RELATED SETTINGS. WITH THE REBOOT OF THE OR HUB THESE DISPLAY FORMAT AND DISPLAY PROFILE SETTINGS ARE REVERTING BACK AUTOMATICALLY TO HDMI SETTINGS WHICH IS CAUSING FLICKERING IN THE ROOM. CUSTOMER WANTS THE DISPLAY PROFILE AND DISPLAY FORMAT SETTINGS TO STICK IN FUTURE SOFTWARE. THEY KEEP GETTING FLICKERING IN THIS ROOM SO THEY INSPECTED IT AND FIGURED OUT THAT THIS SETTING KEEPS DEFAULTING BACK EVEN THOUGH THEY WANT IT TO STAY ON THE SETTING THEY SET IT TO. IT JUST KEEPS DOING IT. SOMETIMES IN A MINUTE THERE WOULD BE A LOT OF FLICKERING WITHIN A MINUTE, AND SOMETIMES IT WOULDN¿T FLICKER FOR 15 OR 20 MINUTES. HENCE THERE IS A LOSS OF IMAGE AND FLICKERING.

  Patient problems: No Clinical Signs, Symptoms or Conditions

  MAUDE report 24509753 ↗
• MalfunctionFeb 4, 2026No Display/Image; Output Problem

  IT WAS REPORTED THAT ALL THE MONITORS SHUT OFF DURING THE CASE, AND THEY LOST VIDEO FOR QUITE SOME TIME. NOT SURE TO THE EXTENT THAT IT REMAINED OFF, BUT THE CASE WAS ABORTED DUE TO MALFUNCTION. NO HARM AS A RESULT OF THE CAMERA BOX, BUT CASE WAS ABORTED AND RESCHEDULED. THERE IS ALSO SUSPICION TO THE HUB POSSIBLY SHUTTING OFF AND RESTARTING MID-CASE AS TO AN EXPLANATION FOR WHY ALL MONITORS LOST SIGNAL.

  Patient problems: No Clinical Signs, Symptoms or Conditions

  MAUDE report 24260873 ↗
• MalfunctionDec 11, 2025Overheating of Device; Electrical Power Problem; Overheating of Device; Electrical Power Problem

  IT WAS REPORTED THAT HUB SHORTED OUT AND STARTED SMOKING WHEN IN USE. HENCE IT IS A THERMAL EVENT.

  Patient problems: Insufficient Information

  MAUDE report 23781863 ↗
• MalfunctionDec 11, 2025No Display/Image; Connection Problem; No Display/Image; Connection Problem

  IT WAS REPORTED THAT UNIT PRODUCED ERROR CODES AND SELF-REBOOTED X2 TIMES IN LESS THAN 24HRS OF OPERATION. THERE WAS FULL LOSS OF IMAGE ON PRIMARY MONITOR. DURATION OF LOSS OF IMAGE IS UNKNOWN. PROCEDURE COMPLETED WHEN THE DEVICE RESTARTED.

  Patient problems: No Clinical Signs, Symptoms or Conditions

  MAUDE report 23779803 ↗
• MalfunctionMay 8, 2025No Display/Image; Capturing Problem; No Display/Image; Capturing Problem

  IT WAS REPORTED THAT THE CONSOLE/HUB WENT BLACK AND THE SURGEON COULD NOT CAPTURE ANY IMAGES. SINCE THE DEVICE WENT BLACK, IT IS POSSIBLE THAT THERE MAY HAVE BEEN A FULL LOSS OF IMAGE.

  Patient problems: Insufficient Information

  MAUDE report 21988208 ↗
• MalfunctionMay 5, 2025No Display/Image; Output Problem; No Display/Image; Output Problem

  IT WAS REPORTED THAT THE DEVICE WENT DOWN, LOSING VIDEO INTEGRATION DURING THE MEDICAL PROCEDURE. THE CUSTOMER SWITCHED TO BACKUP SIGNALS AND BROUGHT IN AN ENDO CART TO GET THROUGH THE CASE. ONCE THE CASE WAS COMPLETE, THE STRYKER TECHNICIAN SWAPPED A KNOWN WORKING HUB PROVIDED BY THE CUSTOMER TO GET THE OR BACK UP AND RUNNING.

  Patient problems: No Clinical Signs, Symptoms or Conditions

  MAUDE report 21963940 ↗
• MalfunctionMar 27, 2025No Display/Image; Connection Problem; No Display/Image; Connection Problem

  IT WAS REPORTED THAT THERE WAS LOSS OF IMAGE.

  Patient problems: No Clinical Signs, Symptoms or Conditions

  MAUDE report 21712433 ↗
• MalfunctionMar 27, 2025No Display/Image; Connection Problem; No Display/Image; Connection Problem

  IT WAS REPORTED THAT THERE WAS LOSS OF IMAGE.

  Patient problems: No Clinical Signs, Symptoms or Conditions

  MAUDE report 21712419 ↗