Spiral Drill 61273-100Recalls & reported problems

I.T.S. GmbH · Spiral Drill, D=2.7mm, L=100mm, AO Connector, · Class 1

Data updated Oct 16, 2026 from official FDA records · Editorial policy

Adverse event reports: 1
Deaths reported: 0
Injuries reported: 0
Recalls naming it: 0

Summary

The FDA's MAUDE database contains 1 adverse event report that list this exact device (DI 09120069814774), received between Jan 8, 2019 and Jan 8, 2019 — classified as 1 malfunction.

The most frequently reported specific device problem is “Insufficient Device Problem Information” (1 report).

Reports come from manufacturers, hospitals and patients and are not verified by the FDA. A report does not prove the device caused the event, and counts can't be used to compare devices or estimate failure rates. What reports can and can't tell you · How this data works · Data updated Oct 16, 2026.

Most reported problems

Device problems

Insufficient Device Problem Information1

Patient problems

No Information1

Recent adverse event reports

The 1 most recent of 1 reports, in the reporter's own words as published by the FDA.

MalfunctionJan 8, 2019Insufficient Device Problem Information; Insufficient Device Problem Information
IT WAS REPORTED THAT A SPIRAL DRILL BROKE IN TWO PIECES INTRAOPERATIVELY. SURGERY DATE IS UNKNOWN. THERE WERE NO DELAYS IN SURGERY.
Patient problems: No Information
MAUDE report 8225870 ↗

Device details

UDI-DI	`09120069814774`
Brand	Spiral Drill
Model	61273-100
Company	I.T.S. GmbH
Product code	HTW · Bit, Drill
Class	Class 1
FDA submission	None listed
Implant	No
Rx / OTC	—
Single use	No
Sterile	No
MRI safety	Labeling does not contain MRI Safety Information
Status	In Commercial Distribution
Record updated	Oct 1, 2024

Device type (GMDN): Cannulated surgical drill bit, reusable

A shaft of metal intended to be mounted into an appropriate surgical power tool (e.g., a pneumatic reamer or drilling system handpiece with appropriate torque capacity) and rotated to bore into hard/tough tissues (e.g., bone, cartilage) to clear a channel of the same dimension as the diameter of the shaft. This drill is cannulated, having a hollow centre, and is typically flexible so that it can be fed over a guiding pin that has been placed into the correct position prior to operation. This device is typically used in orthopaedic surgery for clearing of the intramedullary channel prior to the insertion of a prosthetic device. This is a reusable device.

Other Bit, Drill devices

QUICKSET 2274-25-500
Depuy Orthopaedics, Inc. · BIT, DRILL
1,985 reports
QUICKSET 2274-35-500
Depuy Orthopaedics, Inc. · BIT, DRILL
770 reports
QUICKSET 2274-30-500
Depuy Orthopaedics, Inc. · BIT, DRILL
761 reports
NA 03.037.022
Synthes GmbH · BIT, DRILL
339 reports
NA 323.062
Synthes GmbH · BIT, DRILL
309 reports
QUICKSET 2274-56-000
Depuy (Ireland) · BIT, DRILL
275 reports
QUICKSET 2274-45-500
Depuy Orthopaedics, Inc. · BIT, DRILL
211 reports
LCS 2366-83-000
Depuy (Ireland) · BIT, DRILL
207 reports

All Bit, Drill devices →

Sources and updates

Device record: FDA GUDID, file dated Oct 13, 2026 · View this device in AccessGUDID ↗
Adverse event reports: FDA MAUDE, file dated Oct 14, 2026 · each report above links to its original FDA record
Recalls: FDA Medical Device Recalls, file dated Oct 16, 2026
Page last rebuilt: Oct 16, 2026. Data downloaded through openFDA, which notes it is not validated for clinical or regulatory use.

How reports and recalls are matched · Editorial policy · Report an error on this page