BD Alaris 8100Recalls & reported problems

Carefusion 303, Inc. · BD Alaris Pump Module (REM V12.1.2+) · Class 2

All models of BD Alaris (2)

Data updated Oct 16, 2026 from official FDA records · Editorial policy

2 open recalls name this device. See the recall details and contact the manufacturer or your healthcare provider.

Adverse event reports: 0
Deaths reported: 0
Injuries reported: 0
Recalls naming it: 2

Summary

No MAUDE adverse event reports in our data reference this device identifier directly.

2 FDA recall records name this device's identifier, 2 still open.

Reports come from manufacturers, hospitals and patients and are not verified by the FDA. A report does not prove the device caused the event, and counts can't be used to compare devices or estimate failure rates. What reports can and can't tell you · How this data works · Data updated Oct 16, 2026.

Recalls naming this device

Oct 17, 2025Open, Classified
If infusion pump is dropped or severely jarred this may damage the pump module bezel assembly, which can cause under-infusion, over-infusion, unregulated flow, or pump module failure to calibrate; so dropped/jarred pumps should be removed from use, tested, and inspected by qualified service personnel prior to reuse; tip sheet, cleaning and disinfecting procedure and reference guide updated.
Z-0430-2026 · Root cause: Device Design · Recall details · FDA record ↗
Jul 8, 2025Open, Classified
Infusion pump module used with compatible pump infusion sets may perform outside the established performance ranges for flow rate and bolus accuracy, downstream and upstream occlusion time to alarm, and post-occlusion bolos volume.
Z-2179-2025 · Root cause: Under Investigation by firm · Recall details · FDA record ↗

Device details

UDI-DI	`10885403517723`
Brand	BD Alaris
Model	8100
Company	Carefusion 303, Inc.
Product code	FRN · Pump, infusion
Class	Class 2
FDA submission	None listed
Implant	No
Rx / OTC	Prescription
Single use	No
Sterile	No
MRI safety	MR Unsafe
Status	Not in Commercial Distribution
Record updated	Aug 19, 2024

Device type (GMDN): Bedside infusion pump, single-channel

An electrically-powered, non-ambulatory (bedside) device designed to facilitate the accurate and consistent administration of a single drug/solution which can be delivered via intravenous, subcutaneous, arterial, epidural, and intracavital routes using a dedicated infusion set; it is not dedicated to a specific treatment type. It is used to supply higher pressures than those provided by gravity infusion sets or infusion controllers (e.g., typical flow range of 1 to 999 ml/hour) and delivers solutions from a standard infusion bag or bottle of fluid. It is intended primarily for use at the bedside but typically has internal batteries that enable operation, e.g., during transportation.

Other Pump, infusion devices

Alaris 8100
Carefusion 303, Inc. · Pump, infusion
2 recalls2 deaths650,218 reports
Alaris 8100
Carefusion 303, Inc. · Pump, infusion
4 recalls78 deaths344,514 reports
Alaris 8015
Carefusion 303, Inc. · Pump, infusion
2 recalls45 deaths148,093 reports
BD® Alaris™ Pump Module, Model 8100
Carefusion 303, Inc. · Pump, infusion
5 recalls30 deaths51,256 reports
Alaris 8110
Carefusion 303, Inc. · Pump, infusion
2 recalls4 deaths21,956 reports
Alaris 8110
Carefusion 303, Inc. · Pump, infusion
2 recalls2 deaths15,547 reports
Alaris 8015
Carefusion 303, Inc. · Pump, infusion
3 recalls6 deaths13,022 reports
CADD 21-6500-51
Icu Medical, Inc. · Pump, infusion
2 deaths8,231 reports

All Pump, infusion devices →

Sources and updates

Device record: FDA GUDID, file dated Oct 13, 2026 · View this device in AccessGUDID ↗
Adverse event reports: FDA MAUDE, file dated Oct 14, 2026
Recalls: FDA Medical Device Recalls, file dated Oct 16, 2026 · each recall links to the FDA recall notice
Page last rebuilt: Oct 16, 2026. Data downloaded through openFDA, which notes it is not validated for clinical or regulatory use.

How reports and recalls are matched · Editorial policy · Report an error on this page